How Ham Radio Works
A teen in Florida makes friends over the airwaves with a ham in Germany. An aircraft engineer in Washington participates in an annual contest and exchanges call signs with hams in 100 countries during a single weekend. In North Carolina, volunteers pass health and welfare messages in the aftermath of a hurricane.
This mix of fun, public service, friendship and convenience is the main feature of amateur radio. The true origin of the term "ham" seems to have been lost, but there are several theories. It may simply be a shortcut way of saying the first syllable of amateur radio, or it may have originally been used as an insult. Hams start out in amateur radio for many reasons, but they all have in common a basic knowledge of radio technology, regulations and operating principles.
Ham radio can be very portable and affordable. In this article, we will look at ham radio and show you how to get started in this wireless world!
Why would I get into ham radio?
Ham radio is for anyone who likes to communicate with others via wireless technology. It is also for anyone who enjoys experimentation. Licensed amateur radio operators communicate with each other in nearby places, across the country, around the world or even with astronauts in outer space!
Amateur radio is a worldwide group of people who communicate with each other over a wide frequency spectrum using many different types of wireless transmitting modes.
Often, younger hams get a chance to meet other hams of various ages and professions. For example, Kid's Day is an annual event that encourages young people to get on the air, perhaps with a family member or a neighbor who is a licensed amateur radio operator. The frequent networking often helps teens when they are making career or education choices and wish to get some advice (from professionals in many technical fields) that maybe mom, dad or the guidance counselor may not be able to give.
Today, there are approximately 675,000 amateur radio operators in the United States, and more than 2.5 million around the world. To find out how to get started and who to contact in your area, call or write the non-profit organization:
Frequencies and Transmitting Modes
Hams use a variety of frequencies for communications. Non-hams can "listen in" via their own receivers orradio scanners. Hams are able to use many frequency bands across the radio spectrum -- these frequencies are allocated by the FCC for amateur use. Hams may operate from just above the AM broadcast band to the microwave region, in the gigahertz range. Many ham bands are found in the frequency range that goes from above the AM radio band (1.6 MHz) to just above the citizens band (27 MHz). During daylight, 15 to 27 MHz is a good band for long-distance communications. At night, the band from 1.6 to 15 MHz is good for long-distance communications. These bands are often referred to historically as short-wave bands (as in "short-wave radio"). Unlike frequencies used by FM radio stations and TV stations, which are line-of-sight and therefore limited to 40 or 50 miles, short-waves "bounce" off theionosphere from the transmitter to the receiver's antenna. The higher the frequency is, the "shorter" the wavelength is.
Some ham radio operators use the very reliable Morse code, while others use voice. Morse code signals (beeps) often get through when voice transmissions cannot. There are also very many digital modes as well, and hams use radio modems to communicate in various networks.
Ham Radio Activities
Although a ham radio does broadcast in all directions, hams generally do not use their radios in a broadcast kind of way as a disk jockey would at a radio station. In normal AM or FM radio, one disk jockey transmits and thousands of people listen. Hams, on the other hand, conduct two-way conversations, often with another ham or with a group of hams in an informal roundtable. The roundtable of hams may be in the same town, county, state, country or continent or may consist of a mix of countries, depending on the frequency and the time of the day. Hams also participate in networks, often called nets, at predetermined times and frequencies to exchange third-party messages. In the case of disasters, hams exchange health and welfare information with other hams. Some hams use radioteletype, (RTTY) with computer screensreplacing the noisy teletype machines of the past.
Many hams get their start on VHF FM, using battery-operated hand-held transceivers set to transmit on one frequency and receive on another frequency. They use FM repeaters, set up and supported by local radio clubs. These repeaters borrow antenna space from TV-station-tower owners on top of mountains and high buildings to receive and re-broadcast signals to extend the range.
The FM repeater receives one signal at a time and simultaneously rebroadcasts it on another frequency using many more watts of power than available from a small hand-held radio. This extends the range of the hand-held radio from a few miles to tens or hundreds of miles! The whole country has theserepeaters! (Listen to one with a radio scanner to learn a lot about ham radio.) When a ham is traveling, he or she can find a repeater to use (great for tips on local restaurants), and carry on a nice, static-free, FM-radio-quality conversation via a radio that fits in the shirt pocket or purse. Linked repeaters allow fun wireless communications across an entire state with a hand-held radio.
Repeaters use common transmit and receive frequency pairs. The frequency pairs in use are informally assigned by groups of hams so that any frequency pair in use is far enough from another repeater so as not to cause unwanted interference.
Amateur radio satellites are a cutting-edge use of technology in amateur radio. Radio amateurs use their hand-held radios to communicate through an amateur radio satellite when the satellite is overhead. A current British satellite has a receiver (uplink) at 145.975 MHz and simultaneously rebroadcasts (downlink) at 435.070 MHz for one station at a time, as a repeater.
Natural disasters like hurricanes or tornadoes disrupt normal telephone and cell phone systems. Ham radio operators pitch in to help with emergency communications, and you will often hear about them on news reports.
On Space Shuttle missions, each member of the crew usually has an amateur radio operator's license. During breaks, astronauts hold their 1- to 5-watt VHF FM hand-held radios up to the shuttle window and chat with other hams for a few minutes, often at schools while the shuttle is in an orbit overhead! VHF transmissions have a limit to line-of-sight communications and normally do not travel over the horizon, so a conversation is limited to the time when the shuttle is overhead. The space station MIR used 145.985 MHz for similar conversations. Future ham radio efforts in space will focus on the use of amateur radio within the International Space Station (ARISS) project.
License Requirements
You need an easy-to-earn license to transmit on an amateur radio frequency. License tests cover electronics theory and amateur radio rules and regulations. Study guides are readily available. There is no age restriction. Each country has its own licensing arrangements. Many countries share many of the same frequency bands with hams in the United States. Each license class allows operation in certain bands, using certain modes. The higher the class of license, the more allowable frequency bands that are available for use.
Recently, the FCC relaxed the Morse code requirements portion of the rules to make it easier to get an amateur radio operator's license. The FCC's new licensing plan means you will be able to become a ham by passing a single 35-question written examination. License study guides are readily available for the written test.
The American Radio Relay League (ARRL) helps many get into amateur radio. The ARRL was organized in 1914 by H.P. Maxim to help relay radio messages. Most radio messages had a 25-mile range at that time and were transmitted around 1.5 MHz, at the high end of the AM broadcast band. The ARRL has many useful publications. Local volunteers around the country administer amateur radio tests. These volunteers are usually members of an amateur radio club.
What are the amateur radio operator exams like?
The FCC licensing requirements includes a mixture of written tests for several license classes and a Morse Code test of five words per minute for some license classes.
The written tests consist of multiple choice exams. You can access online study guides or you can buy them. Each type of license has specific operating privileges on each ham band.
Ham Radio Equipment
A typical ham radio is a transmitter and a receiver, usually purchased as one unit, called a transceiver. Newer transceiver models often have semi-complicated controls and menu systems that may take some reading of the manual. You may be able to find an older transceiver with controls that are easier to use as a beginner, having the usual analog controls.
Hand-held transceivers have their own antennas. Many hams choose to do most of their operating from their automobile during commute times, using a magnetic mount antenna connected to an under-dash transceiver or a hand-held radio.
Power Output
Depending on the size (hand-held or desktop), power can be from a few milliwatts to 1,500 watts. Many new hams are graduates from citizens band (CB) radio. Unlike the 5-watt limit on CB, hams can use quite a bit more power (1,500 watts).
The ham radio can fit in your shirt pocket, take up half of an attic or garage, sit on a desk next to the computer or go into a car. Right now, during the current sunspot cycle, it is possible to talk around the world during daylight hours running just a few watts of power. This particular type of radio-wave propagation is in the 28-MHz band (commonly called the 10-meter band) thanks to short-wave propagation (300 divided by the frequency in MHz is a quick way to convert to "meters").
Antennas
Little whip antennas, wire antennas in trees, and antennas atop a tower are all used, depending on the frequency in use. Lower frequencies have longer wavelengths. Longer wavelengths need larger antennas. The same antennas (used to transmit and receive) can be small, portable, put in trees or on the trunk of a car.
The common 146-MHz (2-meter) antenna is a 19-inch quarter-wave whip. A wavelength at 146 MHz is approximately 2 (300 divided by 146) meters, and a quarter wave of 2 meters is about 19 inches (50 cm). Hams enjoy the fun of experimenting with various types of antennas. Some antennas are made of wire strung between trees. Be sure to use lightning protection for outside antennas!
Hams, including the writer of this article, have communicated with other hams using the following types of antennas with antenna tuners:
- Metal window screens in upper floors of hotels and motels
- Aluminum extension ladders, insulated from the ground, leaning against a house (the lower the frequency, the longer the ladder)
- Soldered-together rain gutters and downspouts
- Flat copper "burglar-tape" hidden behind wallpapered walls
- Extended "Slinky" toys supported by a rope through the middle, in an attic
- Camera-tripod-supported whip antenna
- Disguised flagpoles fed with buried coaxial cable
- Fine wires cast with a fishing rod between dormitory buildings
What keeps ham operators from transmitting on the same frequency?
Many hams can be on the same frequency, but it depends on the propagation factors. VHF and UHF are line-of-sight, so many hams can be on the same frequency in one state. On short-wave bands, radios havevariable frequency tuning to allow moving your transmitted signal (in very small increments) in between two other transmitting stations. Hams often do a lot more listening than transmitting. Often, they listen for another ham that identifies the station as being in a sought-after county, state, or country.
Hams collect confirmations of contacts using QSL cards. Hams collect the QSL cards and receive awards for contacting so many countries on certain frequency bands. VHF and UHF hand-held radios typically use channeledcommunications, using selectable fixed frequencies.
Hams collect confirmations of contacts using QSL cards. Hams collect the QSL cards and receive awards for contacting so many countries on certain frequency bands. VHF and UHF hand-held radios typically use channeledcommunications, using selectable fixed frequencies.
Hamfests
There are frequent hamfests, or ham radio flea markets, in many areas. Hamfests are the best place to meet hams, buy equipment, and take your license test. It's a great way to find some terrific deals on used equipment. You will also find computer parts at hamfests. It is relatively inexpensive to get into amateur radio if you learn how to shop for used equipment with the aid of someone at a local radio club. Think of a hamfest as a real-time, in-person ham radio display like that found at eBay -- but you don't have to bid against others!
Look for a transceiver with a built-in general coverage receiver. That way, you get the versatility of two hobbies: ham radio and short-wave listening.
Each May, the world's largest ham radio convention is held in Dayton, Ohio.
No comments:
Post a Comment